Description
This kit is perfect if you already have your own Go Kart rims and tyres. It contains:
- Two axle tube extensions that you simply knock into your existing axle tube with a soft hammer or wood
- A custom fabricated axle, with thread on each end that will allow varying widths of hubs and front kart wheels
- Two nuts, designed using allen grub screws so that they don’t come undone while you’re sliding
You may need to purchase spacers so that the axle will fit your rims. Have a look at this diagram and measure up the distance from the outside of each bearing:
Get the tool… all of our axles have custom fabricated nuts which tighten with an 8mm allen key grub screw (sounds easy enough, I’m sure you have one from that last flat pack you put together) but you need to hold the nut in place with a 22mm spanner while you tighten it… and all of this is around 150mm from easy reach, inside the go-kart rim. It’s a little awkward! But we have created a simple tool to make this dead simple. You can find the tool back on the store or here.
The axles are sandblasted and primed ready for any colour you choose to paint them.
Reviews
There are no reviews yet.